+.100" Longer then stock, Set of sixteen

Hardened 5/16" Pushrods- 6.350" (+.100") 16 Pushrods

Application: 302 FORD w/ Factory Hyd Roller Lifters. GT40, GT40P, HO 302

 These hardened 5/16" pushrods are a good choice for 302 engines with factory Hyd Roller Lifters in need of 6.350" length pushrods.

They can be used with pedestal mount stock rockers, pedestal mount roller rockers or with screw in stud and guide plates.

Length is around +.100" longer then standard length for GT40P, GT40 and HO 302 w/ factory Hyd Roller cam.

Many aftermarket Hyd Roller cams require longer then stock pushrods to get the lifter preload set properly.

If you've installed a new performance cam and find the stock pushrods are too loose, longer pushrods are in order.

    Specifications:

• Purchase quantity 1, get a set of sixteen pushrods
• 6.376" Theoretical length (if the ends didn't have oil holes, this is around what it would measure)
  
• 6.352" End to end measured Length*
  
• .060" wall thickness
  
• 5/16" Diameter
  
• Carbo Nitrided 1010 steel
• Suitable for mild performance street engines
• Manufactured in the USA
  

 Need a different length?

We carry HP .080" wall pushrods in the following lengths: (check our other listings)

• 6.250" (Std)
• 6.260" (+.010")
• 6.300" (+.050")
• 6.310" (+.060")
• 6.320" (+.070")
• 6.340" (+.090")
• 6.360" (+.110")

*Average variation in length is between: 6.348"-6.355"

Alex's Parts- The smart choice in valve train parts~